Skip to Content

5 Easy Tips to Fix the “Cricut Print Then Cut Cannot Read the Cut Sensor Marks” Error

5 Easy Tips to Fix the “Cricut Print Then Cut Cannot Read the Cut Sensor Marks” Error

You were absolutely loving your Cricut’s “print then cut” feature, right? 

But suddenly, you’re hit with the “Cannot Read the Cut Sensor Marks” error! That can be a serious buzzkill when you’re all set to create some craft magic.

Don’t worry! You won’t be left hanging around waiting for customer service. 

Here are some handy-dandy tips that’ll get your machine running smooth and cutting sharp again!

Get your gear ready and let’s fix this!

how to fix print then cut error on cricut

Supplies You’ll Need

– Cricut machine

– Mat

– Sharpie marker

I get commissions for purchases made through some of the links in this post. There is no extra cost to you. See my full disclosure here.

Get the Lowdown on Fixing Cricut Print & Cut Issues

Check your Print Quality:

  1. This pesky error is usually the result of poor-quality prints or feeble black markers that the sensor’s having a tough time picking up. And guess what that leads to? Yep, messed up cuts and a whole lot of annoyance.

Mat Prep:

  1. We don’t want the mat going wonky while being pulled into the machine. So, give your paper or mat a little curl before loading it, and make sure it’s clean. This will keep everything nice and straight, preventing any misalignment mishaps.

Get Drawing:

  1. Grab your Sharpie marker – a fine point would be your best bet – and start drawing lines on the mat where the cut sensor marks should be. They don’t have to be a work of art or span the full width, but they should connect across the mat. This will help the sensor pick up the marks.

Load ‘Em Up:

  1. Slide the mat with your design into the Cricut machine. Just make sure it’s lined up properly and secure.

Ready, Set, Cut:

  1. Kickstart the cutting process by picking the right settings on your Cricut machine. If all goes well, your machine will be able to read the cut sensor marks and get on with the cutting, hassle-free.

Bonus Tip – Printer Head TLC:

If the problem still isn’t fixed, particularly with older or frequently used printers, it might be a case of clogged printer heads. 

Giving them a good clean might just solve it. Just remember, rough cleaning could damage your printer, so be gentle.

Fixing CRICUT Print then cut UPDATE not working and how to fix Cricut Print and cut!

That’s About it to Fix a Print Then Cut Error

Following these steps should help you beat the “Cricut Explore Print Then Cut Cannot Read the Cut Sensor Marks” error.

Drawing lines on the mat with your Sharpie marker should make the sensor read the marks like a pro, meaning perfect cuts every time.

If the error is still there, don’t forget to check your printer heads.

You could also try giving the power button on your Cricut machine a cycle after clearing the error from the screen.

If all else fails, don’t hesitate to reach out to Cricut customer support.

With these tips, you’re all set for an even better Cricut experience! So go on, get back to creating those amazing projects!

Frequently Asked Questions

Q1: What is the ‘Cricut Print Then Cut Cannot Read the Cut Sensor Marks’ Error?

The ‘Cricut Print Then Cut Cannot Read the Cut Sensor Marks’ error is a common issue that occurs when your Cricut machine is unable to detect the registration marks on your printed material, making it impossible to complete the Print Then Cut process.

Q2: What are the common causes of this error?

Common causes of this error include improper printing settings, poor-quality printing, sensor issues on your Cricut machine, or issues with the material you are using. It can also be related to software or firmware problems.

Q3: How can I fix the ‘Cricut Print Then Cut Cannot Read the Cut Sensor Marks’ Error?

You can fix this error by following these easy tips mentioned in the blog post:

  1. Check your printing settings.
  2. Use high-quality materials.
  3. Clean the sensor on your Cricut machine.
  4. Update your Cricut firmware and software.
  5. Ensure proper lighting and positioning.

Q4: Are there any troubleshooting steps if the error persists?

If the error persists, you may want to contact Cricut customer support for more specific guidance. They can assist you in diagnosing the issue and providing a solution tailored to your situation.

Q5: How can I prevent this error in the future?

To prevent this error in the future, always follow best practices for Cricut Print Then Cut, use high-quality materials, keep your machine and sensors clean, and stay up-to-date with software and firmware updates. Regular maintenance and proper use will minimize the occurrence of this error.